Iron Age’s 5" decorative channel drain grates fit a number of 100mm wide trench drain systems. The decorative grates (4.8" x 20") are 1/2 Meter long, 3/4" thick and feature a lockdown hole in the center.
- Argo (Heel proof)
- Greek Key
- Interlaken (Heel proof)
- Interlaken (for Polycast)
- Mission Bay (heel proof)
- Oblio (Heel proof)
- Que (heel proof)
- Rain (heel proof)
- Regular Joe
- Regular Joe (Heel proof)
- River Rock
The 5.1" wide polymer concrete MEA J1000 Series is available with a built-in slope, no slope or a stepped slope. With an integral galvanized edge rail, the J1000 system shows a clean surface edge. The channel’s edge rail not only enhances its decorative appeal in public areas but also protects the channel beneath.
Our 5" Mearin 100 Driveway Drainage Kit is a great drainage solution for many residential and commercial applications. Channel is made from heavy duty fiberglass construction for many years of service.
We carry a large selection of decorative Iron Age grates plus iron slotted and galvanized grates to suit your project.
Each Mearin 100 channel section is 1 meter long (3.3ft).
Enviro-Flo by J.R. Smith
Iron Age’s 5” decorative channel drain grates fit the Enviro-Flo polypropylene channel from J.R. Smith. EnviroFlo has in interlocking design with a built-in slope of .6% with radiused bottom.
Smith/ACO K100S by J.R. Smith
Iron Age’s 5” decorative channel drain grates fit the NW100 channel from J.R. Smith. Features 1 meter polymer concrete channels with built-in 0.6% slope.
PolyDrain by ABT
ABT's PolyDrain channels have a built-in 0.6% slope with a smooth radius bottom and a 4 inch trench width. The polymer concrete channel system is also available with a ductile iron frame for increased load capacities.
The 5-3/8" Iron Age drain grates fit Zurn’s Z886 and Z806 trench systems. The 5-3/8" decorative cast iron patterns (5-3/8" x 20") has a sturdy geometric design and a lockdown hole for securing into the compatible system.
The grates for these systems are wider (5.375") than the grates for the standard 100mm wide channels (4.8"). The length is around 20 inches, which is about 1/2 meter.
Z886 is a 4" wide, pre-sloped, high density polyethylene trench drain system. With a durable, lightweight construction and lengthy channels (80"), the Zurn Z886 Perma-Trench offers a convenient and long-lasting drainage system.
Z806 is a pre-sloped, fiberglass bodied channel drain with a 4" interior width. Offered in 10' sections, the Z806 serves best in high-chemical applications over long runs. The length of Z806 channels means fewer channel joints over the course of the run.